Seite 2 von 20 ErsteErste 123412 ... LetzteLetzte
Ergebnis 11 bis 20 von 196

Thema: Ib-nas6220-b

  1. #11
    Cadet
    Registriert seit
    19.03.2011
    Ort
    Hagen, Germany
    Beiträge
    24
    Mein NAS
    NAS6210; NAS4220

    Standard

    Zitat Zitat von oreggin Beitrag anzeigen
    The root login can be activated if you log in to the NAS as admin on the WebUI and then change the username on the browser's addressline from admin to root and press enter and you see that the user name is changed on the webpage. Then go to the password change option, change the root password and voila you can login as root over SSH.
    Now I can dump the MTD partitions and anything as I want
    It doesn't work. I've tried it, but in the addressline, there is only the ip from the server including /hipserv and a # and the directory id....

  2. #12
    Experte
    Registriert seit
    27.03.2008
    Ort
    Cologne / Germany
    Beiträge
    4.936
    Mein NAS
    N2B1 & IB4220 & WNDR3700v2 with OpenWRT

    Standard

    Hey guys some news ....
    Current pinout of serial console
    2mm lead pitch header, near 2*5 header, PCB is with USB/Ethernet-Plug is facing to you.
    The 2 other (4 pin header are on right side)

    Code:
    UNKNOWN  UNKNOWN   TX  GND
      (RX)   (3,3V)
    In pins in parentheses, are not tested yet !!!

    Picture will follow if all is tested.
    Some random kernel coder
    Lots of stuff attached to serial console
    https://github.com/ulli-kroll

  3. #13
    Experte
    Registriert seit
    27.03.2008
    Ort
    Cologne / Germany
    Beiträge
    4.936
    Mein NAS
    N2B1 & IB4220 & WNDR3700v2 with OpenWRT

    Standard

    Bootloader
    Code:
             __  __                      _ _
            |  \/  | __ _ _ ____   _____| | |
            | |\/| |/ _` | '__\ \ / / _ \ | |
            | |  | | (_| | |   \ V /  __/ | |
            |_|  |_|\__,_|_|    \_/ \___|_|_|
     _   _     ____              _
    | | | |   | __ )  ___   ___ | |_ 
    | | | |___|  _ \ / _ \ / _ \| __| 
    | |_| |___| |_) | (_) | (_) | |_ 
     \___/    |____/ \___/ \___/ \__| 
     ** MARVELL BOARD: DB-88F6281A-BP LE 
    
    U-Boot 1.1.4 (Oct 12 2009 - 13:41:53) Marvell version: 3.4.16
    
    U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE60
    
    Soc: MV88F6281 Rev 3 (DDR2)
    CPU running @ 1200Mhz L2 running @ 400Mhz
    SysClock = 400Mhz , TClock = 200Mhz 
    
    DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
    DRAM CS[0] base 0x00000000   size 256MB 
    DRAM Total size 256MB  16bit width
    Flash:  0 kB
    Addresses 8M - 0M are saved for the U-Boot usage.
    Mem malloc Initialization (8M - 7M): Done
    NAND:256 MB
    
    CPU : Marvell Feroceon (Rev 1)
    
    Streaming disabled 
    Write allocate disabled
    
    
    USB 0: host mode
    PEX 0: interface detected no Link.
    Net:   egiga0 [PRIME]
    Hit any key to stop autoboot:  0 
    
    NAND read: device 0 offset 0x100000, size 0x300000
    
    Reading data from 0x3ff800 -- 100% complete.
     3145728 bytes read: OK
    ## Booting image at 00800000 ...
       Image Name:   'Linux-2.6.35.4'
       Created:      2010-09-19   1:19:34 UTC
       Image Type:   ARM Linux Kernel Image (uncompressed)
       Data Size:    2450376 Bytes =  2.3 MB
       Load Address: 00008000
       Entry Point:  00008000
       Verifying Checksum ... OK
    OK
    Some random kernel coder
    Lots of stuff attached to serial console
    https://github.com/ulli-kroll

  4. #14
    Experte
    Registriert seit
    27.03.2008
    Ort
    Cologne / Germany
    Beiträge
    4.936
    Mein NAS
    N2B1 & IB4220 & WNDR3700v2 with OpenWRT

    Standard

    Code:
    Starting kernel ...
    
    Uncompressing Linux... done, booting the kernel.
    Linux version 2.6.35.4 (thom@11z) (gcc version 4.5.1 (GCC) ) #1 PREEMPT Sun Sep 19 09:18:57 CST 2010
    CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053177
    CPU: VIVT data cache, VIVT instruction cache
    Machine: Marvell DB-88F6281-BP Development Board
    Ignoring unrecognised tag 0x41000403
    Memory policy: ECC disabled, Data cache writeback
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
    Kernel command line: console=ttyS0,115200 ubi.mtd=2,2048 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 256MB = 256MB total
    Memory: 254360k/254360k available, 7784k reserved, 0K highmem
    Virtual kernel memory layout:
        vector  : 0xffff0000 - 0xffff1000   (   4 kB)
        fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
        DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
        vmalloc : 0xd0800000 - 0xfe800000   ( 736 MB)
        lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
        modules : 0xbf000000 - 0xc0000000   (  16 MB)
          .init : 0xc0008000 - 0xc002b000   ( 140 kB)
          .text : 0xc002b000 - 0xc0480000   (4436 kB)
          .data : 0xc049e000 - 0xc04cd3e0   ( 189 kB)
    SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
    NR_IRQS:114
    Console: colour dummy device 80x30
    Calibrating delay loop... 1186.20 BogoMIPS (lpj=5931008)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 512
    CPU: Testing write buffer coherency: ok
    NET: Registered protocol family 16
    Kirkwood: MV88F6281-A1, TCLK=200000000.
    Feroceon L2: Enabling L2
    Feroceon L2: Cache support initialised.
    PCI: bus0: Fast back to back transfers disabled
    bio: create slab <bio-0> at 0
    vgaarb: loaded
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    cfg80211: Calling CRDA to update world regulatory domain
    Switching to clocksource orion_clocksource
    NET: Registered protocol family 2
    IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
    TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
    TCP: Hash tables configured (established 8192 bind 8192)
    TCP reno registered
    UDP hash table entries: 256 (order: 0, 4096 bytes)
    UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    NET: Registered protocol family 1
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
    msgmni has been set to 496
    alg: No test for stdrng (krng)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
    console [ttyS0] enabled
    loop: module loaded
    sata_mv sata_mv.0: version 1.28
    sata_mv sata_mv.0: slots 32 ports 2
    scsi0 : sata_mv
    scsi1 : sata_mv
    ata1: SATA max UDMA/133 irq 21
    ata2: SATA max UDMA/133 irq 21
    NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
    Scanning device for bad blocks
    Bad eraseblock 746 at 0x000005d40000
    Bad eraseblock 808 at 0x000006500000
    Bad eraseblock 816 at 0x000006600000
    Bad eraseblock 1053 at 0x0000083a0000
    Bad eraseblock 1124 at 0x000008c80000
    Bad eraseblock 1666 at 0x00000d040000
    Bad eraseblock 1896 at 0x00000ed00000
    Bad eraseblock 2026 at 0x00000fd40000
    Creating 3 MTD partitions on "orion_nand":
    0x000000000000-0x000000100000 : "u-boot"
    0x000000100000-0x000000700000 : "uImage"
    0x000000700000-0x000010000000 : "root"
    UBI: attaching mtd2 to ubi0
    UBI: physical eraseblock size:   131072 bytes (128 KiB)
    UBI: logical eraseblock size:    126976 bytes
    UBI: smallest flash I/O unit:    2048
    UBI: sub-page size:              512
    UBI: VID header offset:          2048 (aligned 2048)
    UBI: data offset:                4096
    ata1: SATA link down (SStatus 0 SControl F300)
    UBI warning: ubi_eba_init_scan: cannot reserve enough PEBs for bad PEB handling, reserved 6, need 19
    UBI: attached mtd2 to ubi0
    UBI: MTD device name:            "root"
    UBI: MTD device size:            249 MiB
    UBI: number of good PEBs:        1984
    UBI: number of bad PEBs:         8
    UBI: max. allowed volumes:       128
    UBI: wear-leveling threshold:    4096
    UBI: number of internal volumes: 1
    UBI: number of user volumes:     1
    UBI: available PEBs:             0
    UBI: total number of reserved PEBs: 1984
    UBI: number of PEBs reserved for bad PEB handling: 6
    UBI: max/mean erase counter: 1/0
    UBI: image sequence number: 504793264
    UBI: background thread "ubi_bgt0d" started, PID 438
    MV-643xx 10/100/1000 ethernet driver version 1.4
    mv643xx_eth smi: probed
    net eth0: port 0 with MAC address 00:01:d2:0e:26:5b
    libertas_sdio: Libertas SDIO driver
    libertas_sdio: Copyright Pierre Ossman
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    orion-ehci orion-ehci.0: Marvell Orion EHCI
    orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
    orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
    orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usbcore: registered new interface driver ums-datafab
    usbcore: registered new interface driver ums-freecom
    usbcore: registered new interface driver ums-jumpshot
    usbcore: registered new interface driver ums-sddr09
    usbcore: registered new interface driver ums-sddr55
    mice: PS/2 mouse device common for all mice
    input: gpio-keys as /devices/platform/gpio-keys/input/input0
    rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
    i2c /dev entries driver
    md: linear personality registered for level -1
    md: raid0 personality registered for level 0
    md: raid1 personality registered for level 1
    cpuidle: using governor ladder
    cpuidle: using governor menu
    mmc0: mvsdio driver initialized, using GPIO 38 for card detection
    MV-CESA:Fallback driver 'sha1' could not be loaded!
    alg: hash: Failed to load transform for mv-sha1: -2
    MV-CESA:Fallback driver 'hmac(sha1)' could not be loaded!
    alg: hash: Failed to load transform for mv-hmac-sha1: -2
    ata2: SATA link down (SStatus 0 SControl F300)
    mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
    mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
    mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
    mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
    mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
    mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    oprofile: hardware counters not available
    oprofile: using timer interrupt.
    TCP cubic registered
    NET: Registered protocol family 17
    lib80211: common routines for IEEE802.11 drivers
    rtc-mv rtc-mv: setting system clock to 2011-04-05 09:28:04 UTC (1301995684)
    md: Waiting for all devices to be available before autodetect
    md: If you don't use raid, use raid=noautodetect
    usb 1-1: new high speed USB device using orion-ehci and address 2
    md: Autodetecting RAID arrays.
    md: Scanned 0 and added 0 devices.
    md: autorun ...
    md: ... autorun DONE.
    UBIFS: recovery needed
    UBIFS: recovery completed
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: file system size:   248999936 bytes (243164 KiB, 237 MiB, 1961 LEBs)
    UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
    UBIFS: media format:       w4/r0 (latest is w4/r0)
    UBIFS: default compressor: lzo
    UBIFS: reserved for root:  0 bytes (0 KiB)
    VFS: Mounted root (ubifs filesystem) on device 0:13.
    Freeing init memory: 140K
    hub 1-1:1.0: USB hub found
    Failed to execute /linuxrc.  Attempting defaults...
    hub 1-1:1.0: 4 ports detected
            Welcome to Fedora 
            Press 'I' to enter interactive startup.
    Starting udev: [  OK  ]
    Setting hostname isharing:  [  OK  ]
    Checking filesystems
    Checking all file systems.
    [  OK  ]
    Mounting local filesystems:  [  OK  ]
    Enabling /etc/fstab swaps:  [  OK  ]
    Entering non-interactive startup
    Bringing up loopback interface:  [  OK  ]
    Bringing up interface eth0:  RTNETLINK answers: File exists
    [  OK  ]
    Starting portreserve: [  OK  ]
    Starting system logger: [  OK  ]
    Starting rpcbind: [  OK  ]
    Starting NFS statd: [  OK  ]
    Starting RPC idmapd: [  OK  ]
    Starting system message bus: [  OK  ]
    Starting Avahi daemon... [  OK  ]
    Starting openvpn: [  OK  ]
    Starting cups: [  OK  ]
    Mounting other filesystems:  [  OK  ]
    Retrigger failed udev events[  OK  ]
    Starting NAS (nas):  inotify fastcgi buttons diskmon logrota
    Starting sshd: [  OK  ]
    ntpdate: Synchronizing with time server: [FAILED]
    Starting lighttpd: [  OK  ]
    Starting MiniDLNA (minidlna): [  OK  ]
    ubi0                    224208    176284     47924  79% /
    Starting SMB services: [  OK  ]
    [  OK  ] atd: [  OK  ]
    Starting NAS LED (nasled): 
    Starting smartd: [  OK  ]
    
    Fedora release 12 (Constantine)
    Kernel 2.6.35.4 on an armv5tel (/dev/ttyS0)
    
    isharing login:
    Some random kernel coder
    Lots of stuff attached to serial console
    https://github.com/ulli-kroll

  5. #15
    Experte
    Registriert seit
    27.03.2008
    Ort
    Cologne / Germany
    Beiträge
    4.936
    Mein NAS
    N2B1 & IB4220 & WNDR3700v2 with OpenWRT

    Standard

    Termnal settings
    Code:
    elektroman@T400s ~ $ busybox microcom -s 115200 /dev/ttyUSB0
    Some random kernel coder
    Lots of stuff attached to serial console
    https://github.com/ulli-kroll

  6. #16
    Experte
    Registriert seit
    27.03.2008
    Ort
    Cologne / Germany
    Beiträge
    4.936
    Mein NAS
    N2B1 & IB4220 & WNDR3700v2 with OpenWRT

    Standard Serial Console pinout (Final)

    Code:
    3,3V   RX   TX  GND
    Baudrate is 115200
    Bootloader menu
    Code:
             __  __                      _ _
            |  \/  | __ _ _ ____   _____| | |
            | |\/| |/ _` | '__\ \ / / _ \ | |
            | |  | | (_| | |   \ V /  __/ | |
            |_|  |_|\__,_|_|    \_/ \___|_|_|
     _   _     ____              _
    | | | |   | __ )  ___   ___ | |_ 
    | | | |___|  _ \ / _ \ / _ \| __| 
    | |_| |___| |_) | (_) | (_) | |_ 
     \___/    |____/ \___/ \___/ \__| 
     ** MARVELL BOARD: DB-88F6281A-BP LE 
    
    U-Boot 1.1.4 (Oct 12 2009 - 13:41:53) Marvell version: 3.4.16
    
    U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE60
    
    Soc: MV88F6281 Rev 3 (DDR2)
    CPU running @ 1200Mhz L2 running @ 400Mhz
    SysClock = 400Mhz , TClock = 200Mhz 
    
    DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
    DRAM CS[0] base 0x00000000   size 256MB 
    DRAM Total size 256MB  16bit width
    Flash:  0 kB
    Addresses 8M - 0M are saved for the U-Boot usage.
    Mem malloc Initialization (8M - 7M): Done
    NAND:256 MB
    
    CPU : Marvell Feroceon (Rev 1)
    
    Streaming disabled 
    Write allocate disabled
    
    
    USB 0: host mode
    PEX 0: interface detected no Link.
    Net:   egiga0 [PRIME]
    Hit any key to stop autoboot:  0 
    Marvell>> help
    ?       - alias for 'help'
    SatR - sample at reset sub-system, relevent for DB only
    base    - print or set address offset
    boot    - boot default, i.e., run 'bootcmd'
    bootd   - boot default, i.e., run 'bootcmd'
    bootext2    dev:boot_part1,boot_part2 addr boot_image linux_dev_name 
    bootm   - boot application image from memory
    bootp    - boot image via network using BootP/TFTP protocol
    bubt    - Burn an image on the Boot Nand Flash.
    chpart    - change active partition
    cmp     - memory compare
    cmpm    - Compare Memory
    cp      - memory copy
    cpumap - Display CPU memory mapping settings.
    crc32   - checksum calculation
    date    - get/set/reset date & time
    dclk    - Display the MV device CLKs.
    dhcp    - invoke DHCP client to obtain IP/boot params
    diskboot- boot from IDE device
    echo    - echo args to console
    eeprom  - EEPROM sub-system
    erase   - erase FLASH memory
    ext2load- load binary file from a Ext2 filesystem
    ext2ls  - list files in a directory (default /)
    fatinfo - print information about filesystem
    fatload - load binary file from a dos filesystem
    fatls   - list files in a directory (default /)
    fi    - Find value in the memory.
    flinfo  - print FLASH memory information
    fsinfo    - print information about filesystems
    fsload    - load binary file from a filesystem image
    g    - start application at cached address 'addr'(default addr 0x40000)
    go      - start application at address 'addr'
    help    - print online help
    icrc32  - checksum calculation
    ide     - IDE sub-system
    iloop   - infinite loop on address range
    imd     - i2c memory display
    imm[.b, .s, .w, .l]     - i2c memory modify (auto-incrementing)
    imw     - memory write (fill)
    inm     - memory modify (constant address)
    iprobe  - probe to discover valid I2C chip addresses
    ir    - reading and changing MV internal register values.
    loop    - infinite loop on address range
    ls    - list files in a directory (default /)
    map    - Diasplay address decode windows
    md      - memory display
    me    - PCI master enable
    mm      - memory modify (auto-incrementing)
    mp    - map PCI BAR
    mtdparts- define flash/nand partitions
    mtest   - simple RAM test
    mw      - memory write (fill)
    nand                   - NAND sub-system
    nboot   - boot from NAND device
    nbubt    - Burn a boot loader image on the Boot Nand Flash.
    nm      - memory modify (constant address)
    pci     - list and access PCI Configuration Space
    phyRead    - Read PCI-E Phy register
    pciePhyWrite    - Write PCI-E Phy register
    phyRead    - Read Phy register
    phyWrite    - Write Phy register
    ping    - send ICMP ECHO_REQUEST to network host
    printenv- print environment variables
    protect - enable or disable FLASH write protection
    rarpboot- boot image via network using RARP/TFTP protocol
    rcvr    - Satrt recovery process (Distress Beacon with TFTP server)
    reset   - Perform RESET of the CPU
    resetenv    - Return all environment variable to default.
    run     - run commands in an environment variable
    saveenv - save environment variables to persistent storage
    se    - PCI Slave enable
    setenv  - set environment variables
    sflash    - read, write or erase the external SPI Flash.
    sg    - scanning the PHYs status
    sp    - Scan PCI bus.
    tftpboot- boot image via network using TFTP protocol
    usb     - USB sub-system
    usbboot - boot from USB device
    version - print monitor version
    You need a cable with 3,3Volts signals !!
    Some random kernel coder
    Lots of stuff attached to serial console
    https://github.com/ulli-kroll

  7. #17
    Experte
    Registriert seit
    27.03.2008
    Ort
    Cologne / Germany
    Beiträge
    4.936
    Mein NAS
    N2B1 & IB4220 & WNDR3700v2 with OpenWRT

    Standard

    Login currently only as admin possible Passwd admin (of course)
    Code:
    login: admin
    Password: 
    [admin@isharing ~]$ sudo su
    -bash: sudo: command not found
    [admin@isharing ~]$ cat /etc/passwd
    root:x:0:0:root:/root:/bin/bash
    bin:x:1:1:bin:/bin:/sbin/nologin
    daemon:x:2:2:daemon:/sbin:/sbin/nologin
    adm:x:3:4:adm:/var/adm:/sbin/nologin
    lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin
    sync:x:5:0:sync:/sbin:/bin/sync
    shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown
    halt:x:7:0:halt:/sbin:/sbin/halt
    mail:x:8:12:mail:/var/spool/mail:/sbin/nologin
    uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin
    operator:x:11:0:operator:/root:/sbin/nologin
    games:x:12:100:games:/usr/games:/sbin/nologin
    gopher:x:13:30:gopher:/var/gopher:/sbin/nologin
    ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin
    nobody:x:99:99:Nobody:/:/sbin/nologin
    vcsa:x:69:499:virtual console memory owner:/dev:/sbin/nologin
    ntp:x:38:38::/etc/ntp:/sbin/nologin
    dbus:x:81:81:System message bus:/:/sbin/nologin
    lighttpd:x:499:497:lighttpd web server:/var/www/lighttpd:/sbin/nologin
    avahi:x:498:496:avahi-daemon:/var/run/avahi-daemon:/sbin/nologin
    openvpn:x:497:495:OpenVPN:/etc/openvpn:/sbin/nologin
    sshd:x:74:494:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin
    mt-daapd:x:496:493:mt-daapd:/var/lib/mt-daapd:/sbin/nologin
    rpc:x:32:32:Rpcbind Daemon:/var/lib/rpcbind:/sbin/nologin
    rpcuser:x:29:492:RPC Service User:/var/lib/nfs:/sbin/nologin
    nfsnobody:x:4294967294:4294967294:Anonymous NFS User:/var/lib/nfs:/sbin/nologin
    admin:x:500:500:Administrator:/home/admin:/bin/bash
    Running processes
    Code:
    [admin@isharing ~]$ ps auxw
    USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
    root         1  0.3  0.3   1956   820 ?        Ss   09:43   0:01 /sbin/init
    root         2  0.0  0.0      0     0 ?        S    09:43   0:00 [kthreadd]
    root         3  0.0  0.0      0     0 ?        S    09:43   0:00 [ksoftirqd/0]
    root         4  0.0  0.0      0     0 ?        S    09:43   0:00 [watchdog/0]
    root         5  0.0  0.0      0     0 ?        S    09:43   0:00 [events/0]
    root         6  0.0  0.0      0     0 ?        S    09:43   0:00 [khelper]
    root         9  0.0  0.0      0     0 ?        S    09:43   0:00 [async/mgr]
    root       149  0.0  0.0      0     0 ?        S    09:43   0:00 [sync_supers]
    root       151  0.0  0.0      0     0 ?        S    09:43   0:00 [bdi-default]
    root       153  0.0  0.0      0     0 ?        S    09:43   0:00 [kblockd/0]
    root       159  0.0  0.0      0     0 ?        S    09:43   0:00 [ata_aux]
    root       160  0.0  0.0      0     0 ?        S    09:43   0:00 [ata_sff/0]
    root       168  0.0  0.0      0     0 ?        S    09:43   0:00 [khubd]
    root       171  0.0  0.0      0     0 ?        S    09:43   0:00 [kseriod]
    root       174  0.0  0.0      0     0 ?        S    09:43   0:00 [kmmcd]
    root       184  0.0  0.0      0     0 ?        S    09:43   0:00 [cfg80211]
    root       266  0.0  0.0      0     0 ?        S    09:43   0:00 [rpciod/0]
    root       274  0.0  0.0      0     0 ?        S    09:43   0:00 [khungtaskd]
    root       275  0.0  0.0      0     0 ?        S    09:43   0:00 [kswapd0]
    root       322  0.0  0.0      0     0 ?        S    09:43   0:00 [aio/0]
    root       329  0.0  0.0      0     0 ?        S    09:43   0:00 [nfsiod]
    root       335  0.0  0.0      0     0 ?        S    09:43   0:00 [crypto/0]
    root       402  0.0  0.0      0     0 ?        S    09:43   0:00 [scsi_eh_0]
    root       406  0.0  0.0      0     0 ?        S    09:43   0:00 [scsi_eh_1]
    root       420  0.0  0.0      0     0 ?        S    09:43   0:00 [mtdblock0]
    root       425  0.0  0.0      0     0 ?        S    09:43   0:00 [mtdblock1]
    root       430  0.0  0.0      0     0 ?        S    09:43   0:00 [mtdblock2]
    root       438  0.0  0.0      0     0 ?        S    09:43   0:00 [ubi_bgt0d]
    root       439  0.0  0.0      0     0 ?        S    09:43   0:00 [orion_spi]
    root       494  0.0  0.0      0     0 ?        S    09:43   0:00 [mv_crypto]
    root       540  0.0  0.0      0     0 ?        S    09:43   0:00 [usbhid_resumer]
    root       552  0.0  0.0      0     0 ?        S    09:43   0:00 [ubifs_bgt0_0]
    root       635  0.0  0.2   2316   688 ?        S<s  09:43   0:00 /sbin/udevd -d
    root       786  0.0  0.0      0     0 ?        S    09:43   0:00 [flush-ubifs_0_0]
    root      1269  0.0  0.4  29448  1172 ?        Sl   09:44   0:00 /sbin/rsyslogd -c 4
    rpc       1279  0.0  0.3   2512   772 ?        Ss   09:44   0:00 rpcbind
    root      1291  0.1  0.3   2512  1008 ?        Ss   09:44   0:00 rpc.statd
    root      1459  0.0  0.2   3644   520 ?        Ss   09:44   0:00 rpc.idmapd
    dbus      1470  0.0  0.3   2912   832 ?        Ss   09:44   0:00 dbus-daemon --system
    avahi     1480  0.0  0.5   3188  1480 ?        S    09:44   0:00 avahi-daemon: running [isharing.local]
    avahi     1481  0.0  0.1   3188   496 ?        Ss   09:44   0:00 avahi-daemon: chroot helper
    root      1497  0.0  1.0  11512  2664 ?        Ss   09:44   0:00 cupsd -C /etc/cups/cupsd.conf
    root      1564  0.0  2.4  21236  6276 ?        S    09:44   0:00 python /usr/bin/nas-inotify
    root      1567  0.0  2.9  68220  7500 ?        Sl   09:44   0:00 python /usr/bin/nas-fastcgi
    root      1586  0.0  1.7  15488  4360 ?        S    09:44   0:00 python /usr/bin/nas-buttons
    root      1599  0.1  1.9  25132  4944 ?        Sl   09:44   0:00 python /usr/bin/nas-diskmon
    root      1606  0.1  1.4  22456  3816 ?        Sl   09:44   0:00 python /usr/bin/nas-logrota
    root      1618  0.0  0.4   7964  1028 ?        Ss   09:44   0:00 /usr/sbin/sshd
    lighttpd  1915  0.0  0.3   7124   952 ?        S    09:45   0:00 /usr/sbin/lighttpd -f /etc/nas/lighttpd.conf
    root      1932  0.0  0.5  25220  1344 ?        Ssl  09:45   0:00 /usr/sbin/minidlna -f /etc/minidlna.conf
    root      1943  0.0  1.1  19548  2856 ?        Ss   09:45   0:00 smbd -D
    root      1953  0.0  0.4  19548  1256 ?        S    09:45   0:00 smbd -D
    root      1954  0.0  0.1   2328   428 ?        Ss   09:45   0:00 /usr/sbin/atd
    root      1959  0.0  0.5   2896  1444 ?        S    09:45   0:00 /usr/bin/nas-tr -d /etc/nas
    root      1982  0.0  0.1   3900   444 ?        S    09:45   0:00 /usr/sbin/smartd -q never
    root      1986  0.0  0.2   1808   524 tty4     Ss+  09:45   0:00 /sbin/mingetty tty4
    root      1987  0.0  0.2   1808   524 tty5     Ss+  09:45   0:00 /sbin/mingetty tty5
    root      1988  0.0  0.2   1808   524 tty2     Ss+  09:45   0:00 /sbin/mingetty tty2
    root      1989  0.0  0.2   1808   524 tty3     Ss+  09:45   0:00 /sbin/mingetty tty3
    root      1990  0.0  0.2   1808   524 tty1     Ss+  09:45   0:00 /sbin/mingetty tty1
    root      1991  0.0  0.2   1808   524 tty6     Ss+  09:45   0:00 /sbin/mingetty tty6
    root      1994  0.0  0.2   2312   680 ?        S<   09:45   0:00 /sbin/udevd -d
    root      1995  0.0  0.2   2312   680 ?        S<   09:45   0:00 /sbin/udevd -d
    root      2006  0.0  0.8   4772  2088 ?        Ss   09:45   0:00 login -- admin     
    admin     2031  0.0  0.6   4392  1632 ttyS0    Ss   09:45   0:00 -bash
    admin     2084  3.0  0.4   4072  1028 ttyS0    R+   09:50   0:00 ps auxw
    Some random kernel coder
    Lots of stuff attached to serial console
    https://github.com/ulli-kroll

  8. #18
    Experte
    Registriert seit
    27.03.2008
    Ort
    Cologne / Germany
    Beiträge
    4.936
    Mein NAS
    N2B1 & IB4220 & WNDR3700v2 with OpenWRT

    Standard

    Gnahhh .

    Following passwd's for root will not work
    admin, root, feodora feodoraarm

    Maybe we must do this with booting another linux via tftp
    Some random kernel coder
    Lots of stuff attached to serial console
    https://github.com/ulli-kroll

  9. #19
    Cadet
    Registriert seit
    19.03.2011
    Ort
    Hagen, Germany
    Beiträge
    24
    Mein NAS
    NAS6210; NAS4220

    Standard

    nice work eman

    maybe try Gentoo should work via tftp? Do you have access for web packages via admin?

    Maybe a stupid pw recovery tool will help? I am not a prof with serial porting

  10. #20
    Cadet
    Registriert seit
    19.03.2011
    Ort
    Hagen, Germany
    Beiträge
    24
    Mein NAS
    NAS6210; NAS4220

    Standard

    @Oreggin:

    maybe i am total noob with this, but i even try different methods to change the webui to root user...but I always see only the ip x.x.x.x/#view=0 or one of the other points of the menu....maybe you can explain it in detail? Thanks....

    Greetz

    Dennis

Ähnliche Themen

  1. ICY Box NAS6220
    Von neop13 im Forum mit RAID 1
    Antworten: 3
    Letzter Beitrag: 04.03.2011, 21:15

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •