Ergebnis 1 bis 8 von 8

Thema: change 2.6.3.1 to 2.6.3.IB.1.RS.1 problems

  1. #1

    Standard change 2.6.3.1 to 2.6.3.IB.1.RS.1 problems

    Using the web interface I am trying to change from firmware 2.6.3.1 to 2.6.3.IB.1.RS.1 so that i can install some new packages but when i try to upgrade i get a "wrong vendor ID" error. The file i am using to upgrade is called "2.6.3.IB.1.RS.1-webup-20080924.tgz". Am i doing somwthing wrong?

  2. #2
    Experte
    Registriert seit
    26.12.2007
    Ort
    Mutterstadt
    Beiträge
    1.330

    Standard

    This is a Bug in FW 2.6.3.1

    Why do you wish to downgrade ?
    FW 2.6.3.1 supports packages too.

    If you still want to downgrade, please edit /usr/sausalito/handlers/base/upgrade2/CheckImage.sh and remove the following lines
    Code:
    if [ $Vendor_local != $Vendor_now ]; then
         echo "Error:The VendorID is wrong."
         exit 4
    fi
    Then try to downgrade again.
    NAS1: IB-NAS2000, Rev. B (verkauft)
    HDD: 1x500GB Seagate ST3500630A
    NAS2: IB-NAS4220-B, Board Rev. V1.2
    HDD: 2x500GB Seagate ST3500630AS, Raid1, ext3
    FW: 2.6.3.2
    NAS3: IB-NAS4220-B, Board Rev. V1.2
    HDD: 2x160GB Seagate ST3160815AS, Raid1, ext3
    FW: 2.6.3.2
    NAS4: Synology DS209+
    HDD: 2x1TB Seagate ST31000340AS, HDD-FW: SD1A, Raid1, ext3
    FW: DSM 4.0-2219 (Final)
    NAS5: Synology DS212+
    HDD: 2x3TB WD30EZRX, Raid1, ext4
    FW: DSM 4.0-2219 (Final)
    LAN:
    2 x TP-Link 8Port Gigabitswitch TL-SG1008D

  3. #3

    Standard

    I though that the IB.1.RS.1 named firmware was needed for applications such as SSH and Stream Ripper?

  4. #4
    Experte
    Registriert seit
    26.12.2007
    Ort
    Mutterstadt
    Beiträge
    1.330

    Standard

    no, 2.6.3.1 is newer.

    Raidsonic changed its numbering beginning with 2.6.3.1.
    NAS1: IB-NAS2000, Rev. B (verkauft)
    HDD: 1x500GB Seagate ST3500630A
    NAS2: IB-NAS4220-B, Board Rev. V1.2
    HDD: 2x500GB Seagate ST3500630AS, Raid1, ext3
    FW: 2.6.3.2
    NAS3: IB-NAS4220-B, Board Rev. V1.2
    HDD: 2x160GB Seagate ST3160815AS, Raid1, ext3
    FW: 2.6.3.2
    NAS4: Synology DS209+
    HDD: 2x1TB Seagate ST31000340AS, HDD-FW: SD1A, Raid1, ext3
    FW: DSM 4.0-2219 (Final)
    NAS5: Synology DS212+
    HDD: 2x3TB WD30EZRX, Raid1, ext4
    FW: DSM 4.0-2219 (Final)
    LAN:
    2 x TP-Link 8Port Gigabitswitch TL-SG1008D

  5. #5

    Standard

    sounds a bit strange and confusing to me. I think they need to upgrade their documentation as it doesn't mention that the numbering. Thanks for clearing that up for me gmeyer

  6. #6
    Experte
    Registriert seit
    26.12.2007
    Ort
    Mutterstadt
    Beiträge
    1.330

    Standard

    Exactly this was the reason for the change in numbering.
    NAS1: IB-NAS2000, Rev. B (verkauft)
    HDD: 1x500GB Seagate ST3500630A
    NAS2: IB-NAS4220-B, Board Rev. V1.2
    HDD: 2x500GB Seagate ST3500630AS, Raid1, ext3
    FW: 2.6.3.2
    NAS3: IB-NAS4220-B, Board Rev. V1.2
    HDD: 2x160GB Seagate ST3160815AS, Raid1, ext3
    FW: 2.6.3.2
    NAS4: Synology DS209+
    HDD: 2x1TB Seagate ST31000340AS, HDD-FW: SD1A, Raid1, ext3
    FW: DSM 4.0-2219 (Final)
    NAS5: Synology DS212+
    HDD: 2x3TB WD30EZRX, Raid1, ext4
    FW: DSM 4.0-2219 (Final)
    LAN:
    2 x TP-Link 8Port Gigabitswitch TL-SG1008D

  7. #7

    Standard

    Hi , how can i access the /usr/sausalito/handlers/base/upgrade2/CheckImage.sh ?

    thx

    Zitat Zitat von gmeyer Beitrag anzeigen
    This is a Bug in FW 2.6.3.1

    Why do you wish to downgrade ?
    FW 2.6.3.1 supports packages too.

    If you still want to downgrade, please edit /usr/sausalito/handlers/base/upgrade2/CheckImage.sh and remove the following lines
    Code:
    if [ $Vendor_local != $Vendor_now ]; then
         echo "Error:The VendorID is wrong."
         exit 4
    fi
    Then try to downgrade again.

  8. #8
    Experte
    Registriert seit
    26.12.2007
    Ort
    Mutterstadt
    Beiträge
    1.330

    Standard

    You have to go to the NAS via telnet/ssh as root (same PW as admin) and edit the file with vi:
    Code:
    vi /usr/sausalito/handlers/base/upgrade2/CheckImage.sh
    NAS1: IB-NAS2000, Rev. B (verkauft)
    HDD: 1x500GB Seagate ST3500630A
    NAS2: IB-NAS4220-B, Board Rev. V1.2
    HDD: 2x500GB Seagate ST3500630AS, Raid1, ext3
    FW: 2.6.3.2
    NAS3: IB-NAS4220-B, Board Rev. V1.2
    HDD: 2x160GB Seagate ST3160815AS, Raid1, ext3
    FW: 2.6.3.2
    NAS4: Synology DS209+
    HDD: 2x1TB Seagate ST31000340AS, HDD-FW: SD1A, Raid1, ext3
    FW: DSM 4.0-2219 (Final)
    NAS5: Synology DS212+
    HDD: 2x3TB WD30EZRX, Raid1, ext4
    FW: DSM 4.0-2219 (Final)
    LAN:
    2 x TP-Link 8Port Gigabitswitch TL-SG1008D

Ähnliche Themen

  1. IB-NAS4220-B Board Tausch V 1.2 & Ne FW 2.6.3.IB.1.RS.1
    Von Ireng im Forum Infos
    Antworten: 2
    Letzter Beitrag: 22.11.2008, 22:24
  2. IB-NAS4220-B FW 2.6.3.IB.1.RS.1 und nix geht!
    Von Turbo-Freak im Forum Offizielle Firmware
    Antworten: 1
    Letzter Beitrag: 21.11.2008, 02:06
  3. IB-NAS4220-B MLDonkey & 2.6.3.IB.1.RS.1 firmware
    Von NeilS im Forum Packages, Tools and Addons
    Antworten: 4
    Letzter Beitrag: 14.11.2008, 21:51
  4. IB-NAS4220-B admin apssword lost after FW upgrade (2.6.3.IB.1.RS.1)
    Von fbi im Forum Official Firmware
    Antworten: 1
    Letzter Beitrag: 06.11.2008, 08:12
  5. IB-NAS4220-B Neu! Vers. 2.6.3.IB.1.RS.1 erschienen
    Von GrafKrollock im Forum Offizielle Firmware
    Antworten: 1
    Letzter Beitrag: 29.09.2008, 20:24

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •