Ergebnis 1 bis 8 von 8

Thema: short introduction by E-man Style, please don't add here

  1. #1
    Experte
    Registriert seit
    27.03.2008
    Ort
    Cologne / Germany
    Beiträge
    4.930
    Mein NAS
    N2B1 & IB4220 & WNDR3700v2 with OpenWRT

    Standard short introduction by E-man Style, please don't add here

    Hi guys (and gals too )

    After I get some SSH server on the N2B1 running here is some output:
    dmesg
    Code:
    LG-NAS:~# dmesg | sed -e 's/\[............\] //'
    Linux version 2.6.22.18 (root@server) (gcc version 4.2.0 20070413 (prerelease)) 
        #43 Thu Oct 8 11:37:25 KST 2009
    CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053177
    Machine: Feroceon-KW
    Using UBoot passing parameters structure
    Memory policy: ECC disabled, Data cache writeback
    On node 0 totalpages: 32768
      DMA zone: 288 pages used for memmap
      DMA zone: 0 pages reserved
      DMA zone: 32480 pages, LIFO batch:7
      Normal zone: 0 pages used for memmap
    CPU0: D VIVT write-back cache
    CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
    CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
    Built 1 zonelists.  Total pages: 32480
    Kernel command line: console=ttyS0,115200
          mtdparts=nand_mtd:0x100000@0(uboot),0x400000@0x100000(kernel),
          0xb00000@0x500000(rootfs),0x5000000@0x1000000(data) root=/dev/md1 rw lpj=3973120
    PID hash table entries: 512 (order: 9, 2048 bytes)
    Console: colour dummy device 80x30
    Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
    Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
    Memory: 128MB 0MB 0MB 0MB = 128MB total
    Memory: 125952KB available (3352K code, 248K data, 100K init)
    Calibrating delay loop (skipped)... 794.62 BogoMIPS preset
    Mount-cache hash table entries: 512
    CPU: Testing write buffer coherency: ok
    NET: Registered protocol family 16
    
    CPU Interface
    -------------
    SDRAM_CS0 ....base 00000000, size 128MB
    SDRAM_CS1 ....disable
    SDRAM_CS2 ....disable
    SDRAM_CS3 ....disable
    PEX0_MEM ....base e8000000, size 128MB
    PEX0_IO ....base f2000000, size   1MB
    INTER_REGS ....base f1000000, size   1MB
    NFLASH_CS ....base fa000000, size   2MB
    SPI_CS ....base f4000000, size  16MB
    BOOT_ROM_CS ....no such
    DEV_BOOTCS ....no such
    CRYPT_ENG ....base f0000000, size   2MB
    
      Marvell Development Board (LSP Version KW_LSP_4.2.7_patch2)-- 
      RD-88F6192A-NAS  Soc: 88F6192 A1 LE
    
     Detected Tclk 166666667 and SysClk 200000000
    MV Buttons Device Load
    Marvell USB EHCI Host controller #0: c0516600
    PEX0 interface detected no Link.
    PCI: bus0: Fast back to back transfers enabled
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    NET: Registered protocol family 2
    Time: kw_clocksource clocksource has been installed.
    IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
    TCP established hash table entries: 4096 (order: 3, 32768 bytes)
    TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
    TCP: Hash tables configured (established 4096 bind 4096)
    TCP reno registered
    RTC registered
    Use the XOR engines (acceleration) for enhancing the following functions:
      o RAID 5 Xor calculation
      o kernel memcpy
      o kenrel memzero
      o copy user to/from kernel buffers
    Number of XOR engines to use: 4
    cesadev_init(c000c9a4)
    mvCesaInit: sessions=640, queue=64, pSram=f0000000
    Warning: TS unit is powered off.
    squashfs: version 3.4 (2008/08/26) Phillip Lougher
    Starting Selective Mirror Daemon...
    /proc/s_mirror created !!!!!!!!!!!!!!!!!!!
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
    serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
    Loading Marvell Ethernet Driver:
      o Cached descriptors in DRAM
      o DRAM SW cache-coherency
      o Single RX Queue support - ETH_DEF_RXQ=0
      o Single TX Queue support - ETH_DEF_TXQ=0
      o TCP segmentation offload enabled
      o Receive checksum offload enabled
      o Transmit checksum offload enabled
      o Network Fast Processing (Routing) supported
      o Driver ERROR statistics enabled
      o Driver INFO statistics enabled
      o Proc tool API enabled
      o Rx descripors: q0=128
      o Tx descripors: q0=532
      o Loading network interface(s):
        o eth0, ifindex = 1, GbE port = 0
    
    Warning: Giga 1 is Powered Off
    
    mvFpRuleDb (c07df000): 1024 entries, 4096 bytes
    Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
    Copyright (c) 1999-2006 Intel Corporation.
    e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    Integrated Sata device found
    scsi0 : Marvell SCSI to SATA adapter
    scsi1 : Marvell SCSI to SATA adapter
    [0 1] CHANNEL_PM_INIT_DEVICES port:0 status:0
    [0 1] CHANNEL_PM_INIT_DEVICES port:0 status:2
    [0 1] CHANNEL_PM_INIT_DEVICES port:0 status:3
    [0 1] CHANNEL_PM_INIT_DEVICES port:0 status:4
    **********************************************
    Model: Hitachi HDT721010SLA360
    SSC Status : ON
    **********************************************
    [0 1] CHANNEL_PM_INIT_DEVICES port:1 status:0
    [0 1] CHANNEL_PM_INIT_DEVICES port:1 status:2
    [0 1] CHANNEL_PM_INIT_DEVICES port:1 status:3
    [0 1] CHANNEL_PM_INIT_DEVICES port:1 status:4
    **********************************************
    Model: Hitachi HDT721010SLA360
    SSC Status : ON
    **********************************************
    [0 1] CHANNEL_PM_INIT_DEVICES port:2 status:0
    [0 1] CHANNEL_PM_INIT_DEVICES port:2 status:2
    [0 1] CHANNEL_PM_INIT_DEVICES port:2 status:3
    [0 1] CHANNEL_PM_INIT_DEVICES port:2 status:4
    [0 1] CHANNEL_PM_INIT_DEVICES port:3 status:0
    scsi 1:0:0:0: Direct-Access     Hitachi  HDT721010SLA360  ST6O PQ: 0 ANSI: 5
    scsi 1:0:1:0: Direct-Access     Hitachi  HDT721010SLA360  ST6O PQ: 0 ANSI: 5
    scsi 1:0:2:0: CD-ROM            HL-DT-ST BD-RE  BH10NS30  H102 PQ: 0 ANSI: 0
    sd 1:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
    sd 1:0:0:0: [sda] Write Protect is off
    sd 1:0:0:0: [sda] Mode Sense: 23 00 10 00
    sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
    sd 1:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
    sd 1:0:0:0: [sda] Write Protect is off
    sd 1:0:0:0: [sda] Mode Sense: 23 00 10 00
    sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
     sda: sda1 sda2 sda3
    sd 1:0:0:0: [sda] Attached SCSI disk
    sd 1:0:1:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
    sd 1:0:1:0: [sdb] Write Protect is off
    sd 1:0:1:0: [sdb] Mode Sense: 23 00 10 00
    sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
    sd 1:0:1:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
    sd 1:0:1:0: [sdb] Write Protect is off
    sd 1:0:1:0: [sdb] Mode Sense: 23 00 10 00
    sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
     sdb: sdb1 sdb2 sdb3
    sd 1:0:1:0: [sdb] Attached SCSI disk
    sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:2:0: Attached scsi CD-ROM sr0
    sd 1:0:0:0: Attached scsi generic sg0 type 0
    sd 1:0:1:0: Attached scsi generic sg1 type 0
    sr 1:0:2:0: Attached scsi generic sg2 type 5
    NAND device: Manufacturer ID: 0x20, Chip ID: 0xf1 (ST Micro NAND 128MiB 3,3V 8-bit)
    nand_bbm_init: Init nand bad block information...
    nand_bbm_find_pos: nand_bbm_check = 0, erasesize = 20000
    nand_bbm_find_pos: nand_bbm_find_pos: bbm pos = 7800000, pos = 7800000
    Loading nand bad block info(07800000+00020000)...
    nand_bbm_info_load: bbm->magic        = 8192a5a7
    nand_bbm_info_load: bbm->bb_count     = 0
    nand_bbm_info_load: bbm->assign_index = 3ff
    Assign index = 3ff
    nand_bbm_info_load: Loading nand bad block info...ok
    4 cmdlinepart partitions found on MTD device nand_mtd
    Using command line partition definition
    Creating 4 MTD partitions on "nand_mtd":
    0x00000000-0x00100000 : "uboot"
    0x00100000-0x00500000 : "kernel"
    0x00500000-0x01000000 : "rootfs"
    0x01000000-0x06000000 : "data"
    ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
    ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
    ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
    ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    Initializing USB Mass Storage driver...
    usb 1-1: new high speed USB device using ehci_marvell and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    mice: PS/2 mouse device common for all mice
    i2c /dev entries driver
    md: linear personality registered for level -1
    md: raid0 personality registered for level 0
    md: raid1 personality registered for level 1
    device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Geändert von ElektromAn (16.12.2009 um 12:54 Uhr)
    Some random kernel coder
    Lots of stuff attached to serial console
    https://github.com/ulli-kroll

  2. #2
    Experte
    Registriert seit
    27.03.2008
    Ort
    Cologne / Germany
    Beiträge
    4.930
    Mein NAS
    N2B1 & IB4220 & WNDR3700v2 with OpenWRT

    Standard

    Part two of dmesg
    Code:
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: considering sdb3 ...
    md:  adding sdb3 ...
    md: sdb2 has different UUID to sdb3
    md: sdb1 has different UUID to sdb3
    md: sda3 has different UUID to sdb3
    md: sda2 has different UUID to sdb3
    md: sda1 has different UUID to sdb3
    md: created md3
    md: bind<sdb3>
    md: running: <sdb3>
    md: considering sdb2 ...
    md:  adding sdb2 ...
    md: sdb1 has different UUID to sdb2
    md: sda3 has different UUID to sdb2
    md: sda2 has different UUID to sdb2
    md: sda1 has different UUID to sdb2
    md: created md5
    md: bind<sdb2>
    md: running: <sdb2>
    md: considering sdb1 ...
    md:  adding sdb1 ...
    md: sda3 has different UUID to sdb1
    md: sda2 has different UUID to sdb1
    md:  adding sda1 ...
    md: created md1
    md: bind<sda1>
    md: bind<sdb1>
    md: running: <sdb1><sda1>
    raid1: raid set md1 active with 2 out of 2 mirrors
    md: considering sda3 ...
    md:  adding sda3 ...
    md: sda2 has different UUID to sda3
    md: created md2
    md: bind<sda3>
    md: running: <sda3>
    md: considering sda2 ...
    md:  adding sda2 ...
    md: created md4
    md: bind<sda2>
    md: running: <sda2>
    md: ... autorun DONE.
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on md1, internal journal
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    VFS: Mounted root (ext3 filesystem).
    Freeing init memory: 100K
    eth0: link down
    eth0: started
    eth0: link up, full duplex, speed 100 Mbps
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on md2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting.  Commit interval 5 seconds
    EXT3 FS on md3, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 256952k swap on /dev/md4.  Priority:42 extents:1 across:256952k
    Adding 256952k swap on /dev/md5.  Priority:-1 extents:1 across:256952k
    UDF-fs: Partition marked readonly; forcing readonly mount
    UDF-fs INFO UDF 0.9.9.1 (2007/01/03) Mounting volume 'LG_NAS', timestamp 2009/12/11 17:18 (1000)
    SM Config File: /etc/sm_conf (13)
    Mountpoints
    Code:
    LG-NAS:~# mount
    tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
    proc on /proc type proc (rw,noexec,nosuid,nodev)
    sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
    varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
    varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
    procbususb on /proc/bus/usb type usbfs (rw)
    udev on /dev type tmpfs (rw,mode=0755)
    rootfs on / type rootfs (rw,noatime,commit=30)
    devpts on /dev/pts type devpts (rw,gid=4,mode=620)
    /dev/md2 on /mnt/disk/volume1 type ext3 (rw,noatime)
    /dev/md3 on /mnt/disk/volume2 type ext3 (rw,noatime)
    /dev/scd0 on /mnt/device/CD-ROM type udf (ro,iocharset=utf8)
    MTD
    Code:
    LG-NAS:~# cat /proc/mtd
    dev:    size   erasesize  name
    mtd0: 00100000 00020000 "uboot"
    mtd1: 00400000 00020000 "kernel"
    mtd2: 00b00000 00020000 "rootfs"
    mtd3: 05000000 00020000 "data"
    Code:
    LG-NAS:~# cat /proc/mdstat
    Personalities : [linear] [raid0] [raid1]
    md4 : active linear sda2[0]
          256960 blocks 64k rounding
    
    md2 : active linear sda3[0]
          966727360 blocks 64k rounding
    
    md1 : active raid1 sdb1[1] sda1[0]
          9775424 blocks [2/2] [UU]
    
    md5 : active linear sdb2[0]
          256960 blocks 64k rounding
    
    md3 : active linear sdb3[0]
          966727360 blocks 64k rounding
    Geändert von ElektromAn (15.12.2009 um 19:43 Uhr)
    Some random kernel coder
    Lots of stuff attached to serial console
    https://github.com/ulli-kroll

  3. #3
    Experte
    Registriert seit
    27.03.2008
    Ort
    Cologne / Germany
    Beiträge
    4.930
    Mein NAS
    N2B1 & IB4220 & WNDR3700v2 with OpenWRT

    Standard

    Some more output.

    Code:
    LG-NAS:/usr/bin# cat /proc/swaps
    Filename                                Type            Size    Used    Priority
    /dev/md4                                partition       256952  136     42
    /dev/md5                                partition       256952  0       -1
    Code:
    elektroman@t42 ~/LG $ file mtd2
    mtd2: Squashfs filesystem, little endian, version 3.1, 10361804 bytes,
         5087 inodes, blocksize: 131072 bytes, created: Wed Oct  7 14:05:32 2009
    elektroman@t42 ~/LG $ file mtd3
    mtd3: Squashfs filesystem, little endian, version 3.1, 55266922 bytes, 
         2 inodes, blocksize: 131072 bytes, created: Mon Oct 12 13:07:31 2009
    Next in line check contents of mtd2 and mtd3.
    Flash is about 64 MiByte, quite big, nice ....
    But if this size true ??
    Some random kernel coder
    Lots of stuff attached to serial console
    https://github.com/ulli-kroll

  4. #4
    Experte
    Registriert seit
    27.03.2008
    Ort
    Cologne / Germany
    Beiträge
    4.930
    Mein NAS
    N2B1 & IB4220 & WNDR3700v2 with OpenWRT

    Standard

    Even more output:
    here the interesting part:

    Code:
    LG-NAS:/mnt/flash# mount /dev/mtdblock2 /mnt/flash/rootfs/ -r
    LG-NAS:/mnt/flash# mount /dev/mtdblock3 /mnt/flash/data/ -r
    We can mount /dev/mtdblock2 and /dev/mtdblock3

    Code:
    LG-NAS:# ls /mnt/flash/rootfs/ -l
    drwxr-xr-x    2 root     root          863 Sep  2 15:28 bin
    drwxr-xr-x    2 root     root            3 Aug 12 11:13 boot
    drwxr-xr-x    8 root     root        20547 Sep  2 15:28 dev
    drwxr-xr-x    5 root     root          226 Sep  2 15:28 etc
    -rwxr-xr-x    1 root     root          910 Oct  7 21:04 hib_init.sh
    -rwxr-xr-x    1 root     root           25 Sep  2 15:28 hib_reboot.sh
    drwxr-xr-x    3 root     root           24 Aug 12 11:13 home
    -rwxr-xr-x    1 root     root         5733 Sep  2 15:36 init.sh
    drwxr-xr-x    2 root     root          916 Sep  2 15:28 lib
    lrwxrwxrwx    1 root     root           11 Oct  7 20:44 linuxrc -> bin/busybox
    drwxr-xr-x    9 root     root           74 Aug 12 11:13 mnt
    drwxr-xr-x    2 root     root            3 Aug 12 11:13 proc
    drwxr-xr-x    2 root     root            3 Aug 12 11:13 root
    drwxr-xr-x    2 root     root          887 Sep  2 15:28 sbin
    drwxr-xr-x    5 root     root           49 Aug 12 11:13 share
    drwxr-xr-x    2 root     root            3 Aug 12 11:13 sys
    drwxr-xr-x    3 root     root          235 Aug 12 11:13 tmp
    drwxr-xr-x    2 root     root            3 Aug 12 11:13 tmpfs
    drwxr-xr-x    6 root     root           65 Aug 12 11:13 usr
    drwxr-xr-x    7 root     root           99 Aug 24 09:32 var
    Code:
    LG-NAS:/mnt/flash# ls /mnt/flash/data/ -l
    -rw-r--r--    1 root     root     55356452 Oct 12 20:07 firmware_2273.tar.bz2
    Mmmm.
    Looks to me like some "prepare" disk code. aka bootstrap.

    And now the best part

    Code:
    LG-NAS:/# apt-get update
    Get:1 http://http.us.debian.org lenny Release.gpg [1032B]
    Get:2 http://http.us.debian.org lenny Release [73.6kB]
    Get:3 http://http.us.debian.org lenny/main Packages [6703kB]
    Err http://10.177.190.57 lenny Release.gpg
      Could not connect to 10.177.190.57:80 (10.177.190.57), connection timed out
    Fetched 6777kB in 2min46s (40.7kB/s)
    Reading package lists... Done
       W: Failed to fetch http://10.177.190.57/debian/dists/lenny/Release.gpg  
            Could not connect to 10.177.190.57:80 (10.177.190.57), connection timed out
       W: Some index files failed to download, they have been ignored, or old ones used instead.
       W: You may want to run apt-get update to correct these problems
    LG-NAS:/mnt/flash/data#
    Hey DEBIAN is on the BOX nice.
    Lets check
    Code:
    LG-NAS:/mnt/flash# apt-get -s upgrade                              
    Reading package lists... Done                                      
    Building dependency tree... Done                                   
    The following packages have been kept back:                        
      base-files dpkg logrotate                                        
    The following packages will be upgraded:                           
      apt apt-utils dhcp3-client dhcp3-common gnupg gpgv krb5-user libcurl3 libglib2.0-0
      libglib2.0-data libgnutls26 libkadm55 libkrb53 libpam-modules libpam-runtime libpam0g
      libsasl2-2 libsasl2-modules libssl0.9.8 libvolume-id0 libxml2 ntpdate openssl perl-base
      tzdata udev                                                                            
    26 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.                          
    Inst perl-base [5.10.0-19] (5.10.0-19lenny2 Debian:5.0.3/stable)                         
    Conf perl-base (5.10.0-19lenny2 Debian:5.0.3/stable)                                     
    Inst libpam-modules [1.0.1-5] (1.0.1-5+lenny1 Debian:5.0.3/stable)                       
    Conf libpam-modules (1.0.1-5+lenny1 Debian:5.0.3/stable)                                 
    Inst libvolume-id0 [0.125-7] (0.125-7+lenny3 Debian:5.0.3/stable)                        
    Inst udev [0.125-7] (0.125-7+lenny3 Debian:5.0.3/stable)                                 
    Inst apt [0.7.20.2] (0.7.20.2+lenny1 Debian:5.0.3/stable)                                
    Conf apt (0.7.20.2+lenny1 Debian:5.0.3/stable)                                           
    Inst gpgv [1.4.9-3] (1.4.9-3+lenny1 Debian:5.0.3/stable)                                 
    Conf gpgv (1.4.9-3+lenny1 Debian:5.0.3/stable)                                           
    Inst gnupg [1.4.9-3] (1.4.9-3+lenny1 Debian:5.0.3/stable)                                
    Conf gnupg (1.4.9-3+lenny1 Debian:5.0.3/stable)                                          
    Inst libpam-runtime [1.0.1-5] (1.0.1-5+lenny1 Debian:5.0.3/stable)                       
    Conf libpam-runtime (1.0.1-5+lenny1 Debian:5.0.3/stable)                                 
    Inst libpam0g [1.0.1-5] (1.0.1-5+lenny1 Debian:5.0.3/stable)                             
    Conf libpam0g (1.0.1-5+lenny1 Debian:5.0.3/stable)                                       
    Inst apt-utils [0.7.20.2] (0.7.20.2+lenny1 Debian:5.0.3/stable)                          
    Inst dhcp3-client [3.1.1-6] (3.1.1-6+lenny3 Debian:5.0.3/stable) []                      
    Inst dhcp3-common [3.1.1-6] (3.1.1-6+lenny3 Debian:5.0.3/stable)                         
    Inst libgnutls26 [2.4.2-6] (2.4.2-6+lenny1 Debian:5.0.3/stable)                          
    Inst libssl0.9.8 [0.9.8g-15] (0.9.8g-15+lenny3 Debian:5.0.3/stable)                      
    Inst libsasl2-modules [2.1.22.dfsg1-23] (2.1.22.dfsg1-23+lenny1 Debian:5.0.3/stable) []  
    Inst libsasl2-2 [2.1.22.dfsg1-23] (2.1.22.dfsg1-23+lenny1 Debian:5.0.3/stable)           
    Inst tzdata [2008h-2] (2009l-0lenny1 Debian:5.0.3/stable)                                
    Inst krb5-user [1.6.dfsg.4~beta1-5] (1.6.dfsg.4~beta1-5lenny1 Debian:5.0.3/stable) []    
    Inst libkadm55 [1.6.dfsg.4~beta1-5] (1.6.dfsg.4~beta1-5lenny1 Debian:5.0.3/stable) []    
    Inst libkrb53 [1.6.dfsg.4~beta1-5] (1.6.dfsg.4~beta1-5lenny1 Debian:5.0.3/stable)        
    Inst libxml2 [2.6.32.dfsg-5] (2.6.32.dfsg-5+lenny1 Debian:5.0.3/stable)                  
    Inst libcurl3 [7.18.2-8lenny2] (7.18.2-8lenny3 Debian:5.0.3/stable)
    Inst libglib2.0-0 [2.16.6-1] (2.16.6-2 Debian:5.0.3/stable)
    Inst libglib2.0-data [2.16.6-1] (2.16.6-2 Debian:5.0.3/stable)
    Inst ntpdate [1:4.2.4p4+dfsg-8] (1:4.2.4p4+dfsg-8lenny2 Debian:5.0.3/stable)
    Inst openssl [0.9.8g-15+lenny1] (0.9.8g-15+lenny3 Debian:5.0.3/stable)
    Conf libvolume-id0 (0.125-7+lenny3 Debian:5.0.3/stable)
    Conf udev (0.125-7+lenny3 Debian:5.0.3/stable)
    Conf apt-utils (0.7.20.2+lenny1 Debian:5.0.3/stable)
    Conf dhcp3-common (3.1.1-6+lenny3 Debian:5.0.3/stable)
    Conf dhcp3-client (3.1.1-6+lenny3 Debian:5.0.3/stable)
    Conf libgnutls26 (2.4.2-6+lenny1 Debian:5.0.3/stable)
    Conf libssl0.9.8 (0.9.8g-15+lenny3 Debian:5.0.3/stable)
    Conf libsasl2-2 (2.1.22.dfsg1-23+lenny1 Debian:5.0.3/stable)
    Conf libsasl2-modules (2.1.22.dfsg1-23+lenny1 Debian:5.0.3/stable)
    Conf tzdata (2009l-0lenny1 Debian:5.0.3/stable)
    Conf libkrb53 (1.6.dfsg.4~beta1-5lenny1 Debian:5.0.3/stable)
    Conf libkadm55 (1.6.dfsg.4~beta1-5lenny1 Debian:5.0.3/stable)
    Conf krb5-user (1.6.dfsg.4~beta1-5lenny1 Debian:5.0.3/stable)
    Conf libxml2 (2.6.32.dfsg-5+lenny1 Debian:5.0.3/stable)
    Conf libcurl3 (7.18.2-8lenny3 Debian:5.0.3/stable)
    Conf libglib2.0-0 (2.16.6-2 Debian:5.0.3/stable)
    Conf libglib2.0-data (2.16.6-2 Debian:5.0.3/stable)
    Conf ntpdate (1:4.2.4p4+dfsg-8lenny2 Debian:5.0.3/stable)
    Conf openssl (0.9.8g-15+lenny3 Debian:5.0.3/stable)
    Code:
    LG-NAS:/# uname -a
    Linux LG-NAS 2.6.22.18 #43 Thu Oct 8 11:37:25 KST 2009 armv5tejl unknown
    Hmmm
    Code:
    LG-NAS:/# ls /lib/arm-linux-gnueabi/
    LG-NAS:/#
    EABI ??? Hmmm.
    Geändert von ElektromAn (16.12.2009 um 13:06 Uhr)
    Some random kernel coder
    Lots of stuff attached to serial console
    https://github.com/ulli-kroll

  5. #5
    Experte
    Registriert seit
    27.03.2008
    Ort
    Cologne / Germany
    Beiträge
    4.930
    Mein NAS
    N2B1 & IB4220 & WNDR3700v2 with OpenWRT

    Standard

    After I installed the missing compiler
    Code:
    LG-NAS:/# gcc -v
    Using built-in specs.
    Target: arm-linux-gnueabi
    Configured with: ../src/configure -v --with-pkgversion='Debian 4.3.2-1.1' --with-bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs 
    --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --enable-shared --with-system-zlib
    --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls 
    --with-gxx-include-dir=/usr/include/c++/4.3 --program-suffix=-4.3 --enable-clocale=gnu 
    --enable-libstdcxx-debug --enable-objc-gc --enable-mpfr --disable-libssp --disable-sjlj-exceptions
    --enable-checking=release --build=arm-linux-gnueabi --host=arm-linux-gnueabi 
    --target=arm-linux-gnueabi
    Thread model: posix
    Geändert von ElektromAn (18.12.2009 um 14:35 Uhr)
    Some random kernel coder
    Lots of stuff attached to serial console
    https://github.com/ulli-kroll

  6. #6

    Standard

    Hi ElektromAn,
    damit Du hier keinen Monolog führen mußt , würde mich mal interessieren, wie Du den SSH-Server auf das N2B1 gebracht hast. Über die Config-Backup-Funktion?

    Es gibt übrigens ein Firmware-Update:
    http://www.lge.com/de/support/produc...alTab=drivers#

    Mfg Oliver

  7. #7
    Experte
    Registriert seit
    27.03.2008
    Ort
    Cologne / Germany
    Beiträge
    4.930
    Mein NAS
    N2B1 & IB4220 & WNDR3700v2 with OpenWRT

    Standard

    Installing SSH-Server is some kind of tricky. I will write some HOWTO
    Some random kernel coder
    Lots of stuff attached to serial console
    https://github.com/ulli-kroll

  8. #8

    Standard

    Hier mal ein paar Infos zum Flash Typ/ Größe:
    Code:
     
    /dev/mtd0 /dev/mtd0ro
    mtd.type = MTD_NANDFLASH
    mtd.flags = MTD_CAP_NANDFLASH
    mtd.size = 1048576 (1M)
    mtd.erasesize = 131072 (128K)
    mtd.writesize = 2048 (2K)
    mtd.oobsize = 64 
    regions = 0
    
    /dev/mtd1 /dev/mtd1ro (read-only)
    mtd.type = MTD_NANDFLASH
    mtd.flags = MTD_CAP_NANDFLASH
    mtd.size = 4194304 (4M)
    mtd.erasesize = 131072 (128K)
    mtd.writesize = 2048 (2K)
    mtd.oobsize = 64 
    regions = 0
    
    /dev/mtd2 /dev/mtd2ro (read-only)
    mtd.type = MTD_NANDFLASH
    mtd.flags = MTD_CAP_NANDFLASH
    mtd.size = 11534336 (11M)
    mtd.erasesize = 131072 (128K)
    mtd.writesize = 2048 (2K)
    mtd.oobsize = 64 
    regions = 0
    
    /dev/mtd3
    mtd.type = MTD_NANDFLASH
    mtd.flags = MTD_CAP_NANDFLASH
    mtd.size = 83886080 (80M)
    mtd.erasesize = 131072 (128K)
    mtd.writesize = 2048 (2K)
    mtd.oobsize = 64 
    regions = 0

Ähnliche Themen

  1. IB-NAS4220-B a little introduction.... little questions....
    Von Boirolosle im Forum Complex Solutions and Lessons Learned
    Antworten: 2
    Letzter Beitrag: 19.05.2009, 12:35

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •